MPK2000e

10 A micro-ohmmeter

  • Microprocessor controlled
  • Alphanumerical display
  • Direct reading (up to 4½ digits)
  • Resolution: 0.1 μΩ
  • Resistance reading: up to 200 Ω
  • 0.1 % basic accuracy
  • U/I (4-wires) measurement
  • RS232 Data output
  • Rechargeable battery
symbolssymbolssymbols
MPK2000e

Description

The MPK2000e digital very low resistance ohmmeter is a portable, microprocessor controlled instrument used to accurately measure resistances of switches and circuit breaker contacts, transformer and motor windings, wire and cable samples, joints in busbars, etc., using test currents from 1 mA up to 10 A. It uses the Kelvin-type, four-terminals measurement principle, thus eliminating errors caused by lead and contact resistances.

Resistance readings are shown in the alphanumeric display with up to a 4½ digit resolution.

It allows to measure resistances of up to 200 Ω, with basic accuracy of 0.1 % and resolution of 0.1 µΩ. Measurements accuracy is guaranteed by the state-of-the-art system for signal amplification, offset-free and with long-term stability. The equipment has a serial output (RS232) that allows to collect measured values in printer, laptop or any data logger in order to register the tests performed.

The HOLD function keeps in the display the value measured at a certain time-point. The open circuit output voltage is of up to 10 V, depending on the selected test current, reducing the stabilization time for the test current when highly inductive elements are measured. The measurement circuit has an effective protection against voltage peaks originated by those inductances.

Operation is very simple: Just connect the leads, switch-on the equipment, select the test current and press the start button. After a few seconds (depending on inductance of the element), direct reading appears on the display with the measure unit indication (Ω, mΩ or µΩ). If it is necessary, the display will show messages to help the operator (Low battery, Over range, etc).

The equipment is housed in a rugged plastic case with a hinged lid and carrying handle. It is portable, strong, impact resistant and lightweight equipment, suitable to be used in field, under severe weather conditions. It supplies very reliable and accurate measurements both in laboratory and out in the field.

Technical specifications

Test currents

1 mA - 10 mA - 100 mA - 1 A - 10 A.
Each current may be continuously adjustable from 0 to 100 %.

Resistance ranges

0-2000 μΩ @ 10 A.
0-20 mΩ @ 10 A.
0-200 mΩ @ 1 A.
0-2000 mΩ @ 100 mA.
0-20 Ω @ 10 mA.
0-200 Ω @ 1 mA.

Resolution

0.1 μΩ @ 10 A.

Output voltage

Up to 10 VDC (open circuit) @ 1 A.

Measurement principle

Four-terminal, Kelvin-type.

Basic accuracy

±(0.1 % of reading + 0.005 % of full scale).

Advanced features

Digital direct reading of very low resistances in the alphanumerical display, with up to 4½ digits Very fast and accurate measurements.

Serial data output

RS232 @ 4800 bps.

Environmental protection

IP65 (with closed lid).

Safety class

Meets the requirements of IEC 61010-1.

Power supply

Internal battery powered. Battery is rechargeable, sealed lead-acid, 12 V - 7 Ah.

Built-in battery charger

For 110-127 V~ or 220-230 V~ mains.

Operating temperature range

23 °F to 122 °F (-5 °C to 50 °C).

Storage temperature range

-13 °F to 158 °F (-25 °C to 70 °C).

Humidity range

95 % RH (non condensing).

Equipment weight

Approx. 16.76 lb (7.6 kg).

Dimensions

14.88" x 12.13" x 6.89" (378 x 308 x 175 mm).

Included accessories

2 Combined current and potential leads.
1 Ground cable.
1 Power cord.
1 Communication cable (RS232).
1 User guide.
1 Case for the accessories.

Contact
Customer service
Phone: +1 305 938 0389
Fax: +1 786 401 7165
tentech@tentech.com

Sales
Phone: +1 305 938 0389
sales@tentech.com